Last check-in

Hey Montgomery,

I’ll make this my last note.

One thing we’ve seen again and again is that most manufacturers don’t fail because of bad work. They stall because their growth depends on too few clients or a handful of unpredictable sources.

Factur was created to fix that. We help manufacturers build a steady, diverse flow of opportunities so you can focus on running your business without worrying where the next project will come from.

If that sounds worth revisiting, I’d be glad to share a few ideas. If not, no problem at all.

Want me to send them over?

Best regards,

Ally Davis

BDM

e: alyssa.davis@factursolutionmfg.com

w: factursolutionmfg.com

To stop receiving emails, please reply with “remove me” in the Subject line.

A supplier thought

Hi Montgomery,

I wanted to put Die Craft M&E on your radar as a manufacturing resource for large-part machining, waterjet

cutting, fabrication, welding, and engineered industrial components. Our strongest fit is work that is more

complex than basic commodity machining, especially large components, machined weldments, replacement

parts, and spares that require multiple steps. Teams often come to us when OEM timelines are stretched,

supplier coordination is slowing projects, or internal equipment is tied up.

Would it be worth a brief conversation to see if we could support Denrgy on future part ’ needs?

John Boss

Die Craft Machining and Engineering

Business Development Manager

m. 317-342-223

One last try

Hi Montgomery,

I’ll make this my last message.

One thing we have seen over and over is that manufacturers rarely fail because of poor work. They struggle when growth depends on one or two clients or when getting new business is left to chance.

That’s the challenge Factur was built to solve. We help suppliers create steady, diversified opportunities so they can focus on running their business without worrying where the next project will come from.

If that sounds useful for your company, I would be glad to reconnect. If not, no problem at all.

Would you like me to send a few ideas before I close out?

Best regards,

Ash Sanders

BDM

e: ashley.sanders@facturoutreach.com

w: facturoutreach.com

To stop receiving emails, please reply with “remove me” in the Subject line.

Re: Beyond the quotes

Hello Montgomery,

You probably don’t need more quotes. You need better ones.

Factur helps manufacturers attract clients who value what they do, not just what they charge. That means stronger margins, more consistent projects, and less time spent chasing low-value work.

It’s a smarter approach than relying on reps or bid platforms — and it works.

Interested in a short conversation?

Best regards,

Ally Davis

BDM

e: alyssa.davis@factursolutionmfg.com

w: factursolutionmfg.com

To stop receiving emails, please reply with “remove me” in the Subject line.

On 6/3/2026, 10:10:00, alyssa.davis@factursolutionmfg.com wrote:

Hey Montgomery,

Many shops end up chasing bids because they don’t have a plan to attract better work directly. It feels safe and easy, but it usually leads to low margins and short-term wins.

Factur helps manufacturing suppliers step out of that cycle and into consistent expansion. The result is stronger partnerships, better-fit projects, and more predictable work.

We don’t replace reps or agencies. We provide something different. A model built exclusively for manufacturers.

Should I share a few examples?

Best regards,

Ally Davis

BDM

e: alyssa.davis@factursolutionmfg.com

w: factursolutionmfg.com

To stop receiving emails, please reply with “remove me” in the Subject line.

Secondary stamping source for schedule insurance

Hello there Montgomery,

Many customers bring Overton in as a secondary stamping source to protect schedules; overflow capacity, second-source coverage, or quick-turn recovery when a primary supplier is overloaded.

If you’re planning coverage for 2026 programs, who is the best person to speak with about adding a qualified high-speed stamping supplier?

Regards,

Josh Hobson
Cell: 463 219 4280
Business Development | Overton Industries
1250 Old S.R. 67 South, Mooresville, IN 46158
CAGE CODE: 0A611

If this isn’t relevant, just reply “Unsubscribe” and I’ll stay out of your inbox.

Re: Helping teams with complex CNC work

Hey Montgomery,

Curious — do you feel your current suppliers are helping you stay ahead, or are they adding friction?

At Hartmann’s Inc., we focus on being the kind of partner that supports your goals where it matters. From reverse engineering to full assembly, our AS9100D-certified team is built to deliver with precision when timing and quality can't slip.

Would it make sense to take a look at where we might fit?

Dylan Murray
Business Development
Hartmann’s Inc. | AS9100D | ISO 9001
C: (214) 831-6874
www.hartmannsusa.com

To stop receiving emails, please reply with “Not interested” in the Subject line

On 5/29/2026, 16:11:40, m.dylan@hartmannsusa.com wrote:

Hi Montgomery,

I wanted to introduce our team — we’ve been supporting manufacturers for over four generations with precision CNC machining and fabrication.

At Hartmann’s Inc., we’re focused on helping companies hit their technical goals through AS9100D-certified work. From complex components to repeatable builds, we deliver the performance required for critical applications.

We’re currently working with a few teams similar to Denrgy, providing additional capacity for tight-tolerance assemblies — especially when timelines are tight or internal resources are limited.

Happy to share a few examples if that would be helpful.

P.S. If you’re not the one handling this matter, could you connect me with the right team?

Best,
Dylan Murray
Business Development
Hartmann’s Inc. | AS9100D | ISO 9001
C: (214) 831-6874
To stop receiving emails, please reply with “Not interested” in the Subject line

Re: How are you handling tight-tolerance machining?

Hey Montgomery,

Just following up here — wanted to share a bit more on how we support teams like Denrgy when tight tolerances and short lead times are in play.

At Hartmann’s Inc., we help solve complex manufacturing challenges through:
• CNC + EDM machining built to spec
• Rebuilds and reverse engineering for critical assets
• Design-for-Manufacturing support to optimize builds
• Custom assemblies that reduce handling and downtime

Let me know if you'd like to see some examples from recent work.

Dylan Murray
Business Development
Hartmann’s Inc. | AS9100D | ISO 9001
C: (214) 831-6874
www.hartmannsusa.com

To stop receiving emails, please reply with “Not interested” in the Subject line

On 5/29/2026, 16:11:40, m.dylan@hartmannsusa.com wrote:

Hi Montgomery,

I wanted to introduce our team — we’ve been supporting manufacturers for over four generations with precision CNC machining and fabrication.

At Hartmann’s Inc., we’re focused on helping companies hit their technical goals through AS9100D-certified work. From complex components to repeatable builds, we deliver the reliability required for critical applications.

We’re currently working with a few teams similar to Denrgy, providing additional capacity for high-spec assemblies — especially when timelines are tight or internal resources are limited.

Happy to share a few examples if that would be helpful.

P.S. If this is outside your remit, could you let me know who I should follow up with?

Best,
Dylan Murray
Business Development
Hartmann’s Inc. | AS9100D | ISO 9001
C: (214) 831-6874
To stop receiving emails, please reply with “Not interested” in the Subject line

Extra horsepower?

Hi Montgomery,

If you rely on reps or platforms to keep your shop busy, you have probably seen how unpredictable and price-driven that work can be.

Factur helps manufacturers move away from bidding cycles and into relationship-driven expansion. That means higher-value projects, stronger customer relationships, and a more stable pipeline.

Open to exploring how this could work?

Best regards,

Ash Sanders

BDM

e: sanders@factrmgidea.com

w: factrmgidea.com

To stop receiving emails, please reply with “remove me” in the Subject line.

Should I close this out?

Hey Montgomery,

I’ll make this my last note.

One thing we’ve seen again and again is that most manufacturers don’t fail because of bad work. They stall because their growth depends on too few clients or a handful of unpredictable sources.

Factur was created to fix that. We help manufacturers build a steady, diverse flow of opportunities so you can focus on running your business without worrying where the next project will come from.

If that sounds worth revisiting, I’d be glad to share a few ideas. If not, no problem at all.

Would you like to revisit down the road?

Best regards,

Ally Davis

BDM

e: davis@facturgrid.com

w: facturgrid.com

To stop receiving emails, please reply with “remove me” in the Subject line.

Too many eggs, one basket

Hi Montgomery,

Before Factur, our co-founder Gabe ran a successful manufacturing business that depended heavily on one main customer.

For a while, everything looked great. But when that customer scaled back, the company had to close its doors. The business wasn’t diversified, and there was no system to replace the lost work.

That experience shaped how we built Factur. Gabe learned that manufacturers need a consistent, balanced flow of new opportunities. Not dependence on one relationship.

Factur helps companies like yours avoid that same risk with an approach that creates stability and consistent expansion.

Should we talk sometime this week?

Best regards,

Ally Davis

BDM

e: alyssa@facturideamg.com

w: facturideamg.com

To stop receiving emails, please reply with “remove me” in the Subject line.

Beyond the quotes

Hello Montgomery,

Many shops end up chasing bids because they don’t have a plan to attract better work directly. It feels safe and easy, but it usually leads to low margins and short-term wins.

Factur helps manufacturing suppliers step out of that cycle and into consistent expansion. The result is stronger partnerships, better-fit projects, and more predictable work.

We don’t replace reps or agencies. We provide something different. A model built exclusively for manufacturers.

Should I share a few examples?

Best regards,

Ally Davis

BDM

e: alyssa.davis@factursolutionmfg.com

w: factursolutionmfg.com

To stop receiving emails, please reply with “remove me” in the Subject line.

Open to a quick look at one component?

Hi Montgomery,

If you have one stamped component you’re quoting or struggling with, send it over and we’ll review it promptly. If it’s a good fit, we can quote it; if not, I’ll tell you upfront.

Would you like to share a print and annual volume range for a quick assessment?

Thanks,

Josh Hobson
Cell: 463 219 4280
Business Development | Overton Industries
1250 Old S.R. 67 South, Mooresville, IN 46158
CAGE CODE: 0A611

If this isn’t relevant, just reply “Unsubscribe” and I’ll stay out of your inbox.